WIRE THREADED INSERTS AND TAPS

WIRE THREADED INSERTS AND TAPS
Standard threaded inserts Taps supplied by UNI-THREAD are H.S.S. and supplied in intermediate
(second cut) unless specified. Boxed kits contain Drill, Tap, Quantity of 1.5d Inserts, Insertion Tool
& Break-off Tool. Break-off Tools are only supplied in kits up to 1/2" - M12.
Inserts (unless stated) are supplied in 1.5D lengths. (1 1/2 times x nominal diameter).
i.e. M6 inserts x 1.5 = 9mm long.Inserts may be stacked or cut short for different lengths.
(Please note for Blind Holes a Bottoming Tap is also required).

U.N.C. Smaller/Larger Sizes on Application

SIZE	QTY PER PACK	BASIC LENGTHS					TAPPING DRILL	TAP H.S.S. SECOND	BOXED KIT 1.5D INSERTS
SIZE	QTY PER PACK	1 D	1.5D	2 D	2.5D	3 D	TAPPING DRILL	TAP H.S.S. SECOND	BOXED KIT 1.5D INSERTS
# 4 x 40	10	Ł2.64	Ł2.97	Ł3.41	Ł3.74	Ł4.62	Ł1.10	Ł5.72	£21.45
# 6x 32	10	Ł2.64	Ł2.97	Ł3.41	Ł3.74	Ł4.62	Ł1.10	£5.72	£21.45
# 8 x 32	10	Ł2.64	Ł2.97	Ł3.41	Ł3.74	Ł4.62	Ł1.10	£5.72	£21.45
# 10 x 24	10	Ł2.64	Ł2.97	Ł3.41	Ł3.74	Ł4.62	Ł1.10	Ł5.72	£21.45
# 12 x 24	10	Ł2.64	Ł2.97	Ł3.41	Ł3.74	Ł4.62	Ł2.20	Ł5.72	£21.45
1/4 x 20	10	Ł2.75	Ł2.97	Ł3.52	Ł4.29	Ł4.95	Ł2.20	Ł6.27	Ł23.10
5/16 x 18	10	Ł3.30	Ł2.97	Ł4.84	Ł5.72	Ł7.26	Ł2.40	Ł7.48	Ł23.65
3/8 x 16	10	Ł3.52	Ł3.30	Ł5.10	Ł6.05	Ł7.48	Ł3.30	Ł7.92	Ł25.30
7/16 x 14	10	Ł3.96	Ł4.18	Ł6.16	Ł7.70	Ł8.69	Ł3.74	Ł8.69	Ł26.95
1/2 x 13	10	Ł4.29	Ł5.72	Ł7.59	Ł10.12	Ł11.22	Ł4.40	Ł10.23	Ł29.70
9/16 x 12	5	Ł3.30	Ł3.52	Ł5.28	Ł6.05	Ł7.59	Ł8.80	Ł15.40	Ł39.60
5/8 x 11	5	£4.62	£5.17	£5.50	£7.26	£7.26	£16.50	£19.20	£46.20
3/4 x 10	5	£5.28	£6.38	£7.59	£9.79	£12.10	£25.30	£30.40	£60.00
7/8 x 9	3	Ł4.40	Ł6.05	Ł6.60	Ł8.25	Ł10.12	Ł30.30	Ł40.00	Ł70.00
1 x 8	3	£4.73	£6.60	£7.15	£8.91	£11.22	£45.00	£45.00	£96.60

FOR BULK QUANTITIES OR SPECIALS OF ANY SIZE TAPS/INSERTS
PLEASE CALL 01803 867832 OR FAX 01803 867982 FOR A QUOTATION